Table of Contents
Advertisement
2. Eyeglass Mounting Option
This kit comes with the sensor clamped in a typical position on a set of eyeglass
frames. The eyeglass mounting may need to be adjusted to make it work well for
the individual user.
The kit includes:
- Two Allen wrenches (5/64")
- Polyurethane bushings
- Sensor Clamp assembly, including two-part polished stainless steel
clamp, socket head cap screws (2-56), polyurethane bushing and
polyurethane protective grommets.
- Adhesive backed polyurethane tape
- Eyeglass frames
- Angled-head infrared sensor cable
*You may wish to remount the sensor on another pair of frames. The mounting
kit provides additional materials to clamp the sensor in place on different
frames. The angled head sensor may be mounted on flat surfaces, under clear lap
trays, or on surfaces of wheelchair armrests or headrests. These alternate
mounting sites can be used for sensing moving hands, fingers or other body
parts.
If the sensor is not pointed at the correct angle, use the following tips to bend the
sensor.
13
Advertisement
Table of Contents
