Real Time Clock; Internal Display Panel - Toshiba Satellite Pro L730 Series User Manual

Real Time Clock

Problem
The BIOS setting
and system date/
time are lost.
Keyboard
Keyboard problems can be caused by the setup and configuration of the
computer - please refer to the section
Operating Basics, for further information.
Problem
Some letter keys
produce numbers
Output to screen is
garbled

Internal display panel

Apparent computer's display panel problems may be related to the
computer's setup and configuration - please refer to the HW Setup section
in Chapter 4, Utilities & Advanced Usage, for further information.
User's Manual
Satellite L730/L735/Satellite Pro L730
Procedure
The charge in the Real Time Clock (RTC) battery
has run out - you will need to set the date and time
in the BIOS setup application by using the
following steps:
1. Turn on the computer.
2. Press the F2 key when the TOSHIBA
Leading Innovation >>> screen appears -
the BIOS setup application will load.
3. Set the date in the System Date field.
4. Set the time in the System Time field.
5. Press F10 - a confirmation message will be
displayed.
6. Press the ENTER key - the BIOS setup
application will end and the computer will
restart.
The Keyboard
Procedure
Check that the numeric keypad overlay is not
activated - press the FN + F11 hot key and try
typing again.
Please refer to your software's documentation to
ensure that its is not remapping the keyboard in
any way (remapping involves changing or
reassigning the function of each key).
If you are still unable to use the keyboard, you
should contact TOSHIBA Support.
in Chapter 3,
6-7