Operation - Amcor HW12KE User Manual & Installation Manual

OPERATION

General
• Turn the appliance on with the
setting.
• The on/off button
time is stored in the memory.
• The desired temperature is set with the up [4] and/or down [5] button, within the
limits of the thermostat: 18°C – 25°C.
• Use the fan button
or automatic (the symbol on the display will flash). The fan speed in the
automatic setting is determined by the difference between the set temperature
and the room temperature.
Setting the time
The time must be set after initial installation and at the start of a new period of use.
With batteries (new, if necessary) in the remote control:
Press the clock button
down button for minutes.
Cool
1. Press the mode button
2. Set the desired temperature.
3. Use the fan button
Heat
1. Press the mode button
2. Set the desired temperature.
3. Use the fan button
Dehumidify (9KE max. 17 L/24h, 12KE max. 24 L/24h)
1. Press the mode button
2. Set the desired temperature.
3. The fan button does not work in dehumidify mode. The fan speed will always be
low in this mode.
Fan mode
1. Press the mode button
2. Set the desired temperature.
3. Use the fan button
button [1]. This activates the most recent
turns the appliance off; the type of operation set at that
to set the fan speed at low:
[8] to set the time. Use the up button for hours and the
until the cool symbol
to set the fan speed.
until the heat symbol
to set the fan speed.
until the dehumidify symbol
until the fan symbol
to set the fan speed.
, medium:
appears.
appears.
appears.
appears.
GB
, high:
41