Table of Contents
Advertisement
Available languages
Available languages
GB
EXTERNAL UNIT
Drainage pipe
Fix the drainage pipe to the base plate. If
necessary a drainage hose (not included)
leading to a drain can be attached to
this.
On the ground or on the roof the
condensation water can usually drain off
freely.
Check that this does not cause nuisance
to anyone and that it can cause no
damage.
A
Connecting the electricity
Unscrew the protective cover [A] [B].
The electricity for the external unit comes from the internal unit through the cable
with a special little pin contact which clicks into the contact socket [C].
Check that this connection is properly fixed [D].
52
B
Fixing the external unit
Place the rubber footrests and
screw the unit thoroughly on a
strong base.
Keep 50 cm of free space
around the unit
The external unit can be fitted
on special base plates or on
a wall support.Consult your
installer
C
D
Advertisement
Table of Contents
