Table of Contents
Advertisement
USAGE
• Volume Control — This control allows you to balance the output from the subwoofer to the main speakers in your system. This control
should be set to achieve similar volume level of both the main speakers and subwoofer. When pressing volume up or down, the volume
level is shown on the numeric leD on the front panel.
WARNING: Some manufacturers preset their receivers with the Sub-Out channel signal at a minimum level. It is very important to
verify that your receiver Sub-Out channel is set to the same output level as your front right and left channels. Refer to your receiver
manual for the individual channel level adjustment procedure. If your receiver Sub-Out channel is set too low, the subwoofer may
appear to have a weak output, it may sound noisy or distorted, and the Auto On/Off feature may not operate properly.
Note: The volume can also be adjusted via the buttons on the back panel of the subwoofer. These buttons have the same effect as pressing
the up and down volume buttons on your remote. The unit comes preset from the factory with the volume set at 30 out of 80.
• presets — There are four listening presets, consisting of Movies, R&b – Rock, jazz – Classical, and Games. The presets provide the
following characteristics for bass reproduction:
Movies:
Maximum output and impact for explosions and other action adventure movie content.
R&b – Rock:
Provides the driving bass found in today's rock music.
jazz – Classical:
The tightest, cleanest, lowest distortion bass. The flattest frequency response of the four presets.
Games:
Maximum loudness available for the impact of video games.
[ 14 ]
Q-Max User's Manual
Hide quick links:
Advertisement
Table of Contents
