Vax Rapide Spring V-021 Instruction Manual page 4

V-021 User Guide.qxd
Preparing the Machine/Assembly
Fig.3/5 - Clean Water Tank
Assembly
1. Line up mid-section with base unit and slot into
place (as shown).
Fig.3/6
2. Insert handle into mid-section ensuring that the
solution trigger is at the back of the machine and
the screw hole in the handle is lined up with the
screw hole in the mid-section (as shown).
4
5/6/06 4:14 pm Page 5
Align screw holes
3. Insert and tighten screws as indicated.
Insert Screw
Insert Screw
Fig.3/8
4. Twist cord holder until it is facing upwards.
Fig.3/9
5. Finally insert clean water tank and machine is fully
assembled.
Fig.3/10
Insert Screw
Fig.3/11