How To Operate - Vax MACH7 VZL-6017 SERIES Instruction Manual

Vax VZL-6017 User Guide v3.qxd

4. How to operate

On/Off Switch
Plug cord into electrical outlet. To turn cleaner ON, push
ON/OFF switch once. To turn cleaner OFF, push switch
again (Fig.4/1).
Fig.4/1
Brush bar Switch
The cleaner is shipped with the brush bar in the OFF
position. To turn the brush bar ON, step on the pedal (A).
The indicator (B) will show red in the "brush bar on"
B
Fig.4/2
window (Fig.4/2).
Cord Rewind
Grasp the end of the plug and pull to release cord from
cord reel. After desired cord length is reached, the cord
will lock into position.
To return cord for storage, hold plug and press on button
(A) at top of cord reel (Fig.4/3).
NOTE: To prevent cord from whipping, hold plug until
cord is rewound.
8/1/08 16:49 Page 5
A
Fig.4/3
Transporting Cleaner
To move your cleaner from room to room, put handle
in upright position, tilt cleaner back on rear wheels and
push forward (Fig.4/4).
A
Fig.4/4
Handle Positions
The handle of your cleaner has three positions; upright
for storage and when using cleaning tools; operating
position for general operation on carpet and floors; low
for reaching under low furniture. Step on handle release
lever to lower handle (Fig.4/5).
Fig.4/5
Vax Careline 0870 606 1248
1
2
3
how to operate
5