Vax VZL-6017 User Guide v3.qxd
www.vax.co.uk
3. How to assemble
Attach Handle
Using a Phillips screwdriver, remove (2) screws from the
top of the upper housing assembly (Fig.3/1).
Fig.3/1
Insert handle section (A) into upper housing assembly.
Push down firmly until you hear a click (Fig.3/2).
A
Fig.3/2
Fasten (2) screws on either side of handle base (Fig.3/3).
Fig.3/3
4
how to assemble
8/1/08
16:49
Page 4
Position Tools
Place smaller diameter end of wand (A) into bottom of
holder. Snap wand into clip at top. Repeat with other
wand.
Crevice tool (B) fits into one of the extension wands.
Fit combination tool (C) into storage area on side of
Fig.3/4
cleaner as shown (Fig.3/4).
Fig.3/5
Fit TurboTool (A) into recessed area on front of cleaner.
Pivot toward handle to snap in place (Fig.3/5).
B
C
A
A