System Settings; Adjusting The Volume Of Voice Commands (Navigation); Adjusting The Volume Of Aux Input Sources; Adjusting The Display - Vauxhall Antara Infotainment Manual

16 Introduction
or
■ if an audio main menu is currently
active, e.g. the FM1 or CD menu,
press the multifunction knob.
Note
The Audio screen button in the
SETUP menu is not selectable,
when the volume is set to zero.
To adjust the degree of volume
adaptation: set Speed vol. to a value
between 0 and 5.
0: no enhancement of volume with
increasing vehicle speed.
5: maximum enhancement of volume
with increasing vehicle speed.
Adjusting the volume of AUX input
sources
(see image of AUDIO SETUP menu
above)
To adjust the relative volume level for
external audio sources, e.g. a CD
player: set AUX Level to Quiet,
Medium or Loud.
Adjusting the volume of voice
commands (navigation)
To open the NAVIGATION SETUP
menu: press the SETUP button and
then select the Navigation screen
button.
If Voice Guidance is set to Off, set it
to On.
Set Voice Vol. to the desired volume
level. After each change an audible
feedback is given.

System settings

Various settings and adaptions for the
Infotainment system can be
performed via the SYSTEM SETUP
menu.
To open this menu: press the
SETUP button and then select the
System screen button.

Adjusting the display

To open the DISPLAY SETUP menu:
select the Display menu item.