Ending The Dialogue; Sim Card; Pin Code; Main Commands - Vauxhall Antara Infotainment Manual

144 Voice recognition

Ending the dialogue

There are various ways to deactivate
the speech recognition system and
end the dialogue:
■ By pressing q
■ Time-outs: if nothing has been
input for a certain period of time
The speech recognition system is
also interrupted by an incoming call.
Operation
With the aid of the speech recognition
system, the mobile telephone can be
operated very comfortably using the
voice input function. Simply activate
the speech recognition system and
say the desired command. Once the
command has been input, you will be
led through the dialogue with the
corresponding questions and
messages in order to reach the
required action.
Say the commands and digits in a
normal voice, without any artificial
pauses between the numbers.
Recognition is most successful when
you pause for at least half a second
after every three to five numbers.
The Infotainment system
simultaneously reacts to commands
with voice messages and displays.

SIM card

If no SIM card has been inserted, the
following message appears: Please
insert a SIM card!
Once you have inserted a SIM card,
you will be asked to enter the PIN
code. For more on this, see the next
section.

PIN code

If the PIN code has not been entered,
the following message appears:
Please enter the PIN code!.
Now say the PIN code in a normal
voice, without any artificial pauses
between the numbers.
The following commands are
available:
■ "Accept": The PIN code is
confirmed.
■ "Change": The number last entered
is deleted.
■ "Delete": The PIN code is deleted.
■ "Additional digits": Additional
numbers can be entered.
Example of a dialogue whereby a PIN
code is entered:
Voice output: "Please enter the PIN
code!"
User: "One Two Three Four – Accept"
Voice output: "The PIN code is
incorrect!"
User: "Four Three Two One – Accept"
Voice output: "The PIN code has
been accepted"

Main commands

After the speech recognition system
has been activated, you will hear a
short sound, which is a signal to
inform you that the speech
recognition system is waiting for an
input.
The following commands are
available:
■ "Call"
■ "Redial"
■ "Save"