Controlling Route Guidance Via The Navigation Menu; Settings For Route Calculation And Guidance - Vauxhall 2013 Corsa Infotainment system Infotainment Manual

64 Navigation
Controlling route guidance via
the NAVIGATION menu
Press the NAV button to open the
NAVIGATION menu.
The NAVIGATION menu provides
three options that you can use for
controlling route guidance:
■ Options: opens the ROUTE
OPTIONS menu that provides
several settings for route
calculation/recalculation and route
guidance, see "Settings for route
calculation and guidance" below.
■ Route: opens the ROUTE LIST
menu that shows all streets on the
current route, see "Displaying the
route list" below.
■ Cancel Route: cancels the currently
active route guidance.
If an additional waypoint
(intermediate destination) is
currently set for route guidance, a
message prompts you to decide:
if route guidance to both the
waypoint and the final destination
should be cancelled, or,
if route guidance only to the
waypoint should be cancelled.
If you cancel route guidance only to
a waypoint: the navigation system
automatically recalculates the route
to guide you to the final destination.
Settings for route calculation and
guidance
Before starting route guidance, but
also when route guidance is already
active, you can set several criteria for
route calculation/recalculation and
route guidance.
Press the NAV button, and then
select the Options menu item to open
the ROUTE OPTIONS menu.
The following menu options are
available:
■ Dynamic navigation: select, if the
navigation system should take
TMC (traffic) messages into
account for route calculation/
recalculation, see chapter
"Dynamic guidance" 3 68.
Available settings:
Off: no TMC messages are taken
into account for route calculation.