4‑Wire Grounded Junction Box - Frigidaire 318205403 Installation Instructions Manual

ELECTRIC COOKTOP INSTALLATION INSTRUCTIONS
If the appliance is used in a new branch
circuit installation (1996 NEC), mobile home,
recreational vehicle, or where local codes DO
NOT permit grounding through the neutral
(white) wire, the appliance frame MUST NOT
be connected to the neutral wire of the 4‑wire
electrical system.
Your appliance has a 3‑wire cable to be connected
to a 4‑wire grounded junction box (see figure 6):
1. Disconnect the power supply.
2. Separate the green (or bare copper) and white
appliance cable wires.
3. Cap the white wire from the power supply cable if a
3-wire appliance cable is supplied.
4. In the circuit breaker, fuse box or junction box:
Connect appliance and power supply cable wires as
shown in figure 6.
Cable from Power Supply
Ground Wire
Red
Wires
Ground Wire
(Bare or
Green Wire)
Cable from appliance
Figure 6
4‑WIRE GROUNDED JUNCTION BOX
Your appliance has a 4‑wire cable to be connected
to a 4‑wire grounded junction box (see figure 7):
1. Disconnect the power supply.
2. In the junction box:
Connect appliance and power supply cable wires as
shown in Figure 7.
Ground Wire
(Bare or
Green Wire)
White Wire
Black
Wires
Junction Box
U.L.-Listed
Conduit
Connector (or
CSA listed)
5
Cable from Power Supply
Ground
Wire
Red
Wires
Junction Box
U.L.-Listed Conduit
Connector (or CSA listed)
Cable from appliance
Figure 7
4‑WIRE GROUNDED JUNCTION BOX
White
Wires
Black
Wires