Electrical System - Vauxhall Meriva Owner's Manual

156 Vehicle care
2. Press the retaining lug and
withdraw the connector.
3. Rotate the bulb holder clockwise
and remove.
4. Pull the bulb out of the bulb holder
and replace it.
5. Insert the bulb holder into the
housing and turn it anticlockwise.
6. Plug in the connector.
7. Attach the housing.
Instrument panel illumination
Have bulbs replaced by a workshop.

Electrical system

Fuses
Data on the replacement fuse must
match the data on the defective fuse.
There are three fuse boxes in the
vehicle:
■ in the front left of the engine
compartment,
■ in the interior behind the storage
compartment, or, in right-hand
drive vehicles, behind the
glovebox,
■ behind a cover on the left side of the
load compartment.
Before replacing a fuse, turn off the
respective switch and the ignition.
A blown fuse can be recognized by its
melted wire. Do not replace the fuse
until the cause of the fault has been
remedied.
Some functions are protected by
several fuses.
Fuses may also be inserted without
existence of a function.