Vauxhall Agila Owner's Manual page 114

6. Place the compressor unit on
level ground and unwrap the air
compressor hose from the
compressor unit.
Ensure the compressor on/off
switch is in position O (off) and
screw the hose on to tyre valve.
7. Unwrap electrical connection
cable from the compressor unit.
Insert plug into power outlet.
8. Turn ignition key to position ACC.
To avoid discharging the battery,
we recommend running the
engine.
9. Switch compressor on/off switch
to position I (on).
10. Inflate the tyre to the correct
pressure 3 135. If there is no
reading, the air compressor hose
to tyre valve connection may be
faulty. Re-check the connection.
If the prescribed tyre pressure is
not obtained within 10 minutes,
remove the tyre repair kit. Move
the vehicle one tyre rotation.
Reattach the tyre repair kit and
continue the filling procedure for
10 minutes. If the prescribed tyre
Vehicle care
pressure is still not obtained, the
tyre is too badly damaged. Seek
the assistance of a workshop.
If the tyre is overinflated, reduce
the pressure by pressing the
deflation button on the
compressor.
Do not operate the compressor for
more than 10 minutes, to avoid
overheating.
11. When the correct tyre pressure
has been reached, switch
compressor on/off switch to
position O (off).
12. Remove plug from the power
outlet, detach air compressor
hose from tyre valve and replace
valve cap.
13. Return air compressor hose and
electrical connection cable to their
original locations in the
compressor unit.
14. Remove any excess sealant
using a cloth.
113