IP FlexHorn Angled Surface Mount
INTRODUCTION
The VIP-581 IP FlexHorn Angled Surface Mount
unit enables loudspeaker voice paging anywhere
on an Ethernet network. The VIP-581 consists of
a high efficiency Class-D Horn and a Network
interface, allowing stand alone capability when
used with a SIP telephone system or can be
accessed from a variety of Valcom managed
VoIP products. Power is provided to the VIP-581
via a Power over Ethernet (PoE) switch meeting
the 802.3af specification.
SPECIFICATIONS
Access Methods
SIP telephone system
PBX, FXO Port w/VIP-811
POTS telephone set w/VIP-811
PBX, FXS Port w/VIP-821
Valcom M Cast Page Group
Features
RJ-45 for network connection
Network activity LEDs
Power over Ethernet (PoE) 802.3af
compatible
Paintable grille and enclosure
Dimensions/Weight
10.0" H x 12.2" W x 5.0" D
(25.4cm H x 30.9cm W x 12.7cm D
Weight: 7.5 lbs. (3.4 kg)
Nominal Specifications
Input Impedance:
Input Level:
Output Impedance:
Output Level:
VIP-581
1
2
x 3.62" D
1
2
x 9.2cm D
)
600 Ohms
-10dBm
600 Ohms
-10dBm nominal
1
Nominal Power Requirements
Via 802.3af (PoE) Ethernet Switch:
Environment
Temperature:
Humidity:
0 to 85% non-precipitating
Packing List
Qty
1
VIP-581 IP FlexHorn
1
VSP Document
Precautionary Designations
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of electric shock,
Do not remove cover.
No user serviceable parts inside.
Refer servicing to qualified service personnel.
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
ISSUE 2
Class 3
0 to +40° C
Item
947738