Advertisement
Quick Links
IP PoE One-Way/Talkback Surface Mount
INTRODUCTION
The VE5090A IP One-Way/Talkback Surface
Mount FlexHorn unit enables loudspeaker voice
paging anywhere on an Ethernet network. The
VE5090A consists of a high efficiency Class-D
Horn and a Network interface, allowing stand
alone capability when used with a SIP telephone
system or can be accessed from a variety of
Valcom managed VoIP products. Power is
provided to the VE5090A via a Power over
Ethernet (PoE) switch meeting the 802.3af
specification.
SPECIFICATIONS
Access Methods
SIP telephone system
PBX, FXO Port w/VE801x
POTS telephone set w/VE801x
PBX, FXS Port w/VE802x
Valcom M Cast Page Group
Features
RJ-45 for network connection
Network activity LEDs
Power over Ethernet (PoE) 802.3af
compatible
Paintable grille and enclosure
Dimensions/Weight
10.0" H x 12.2" W x 4.0" D
(25.4cm H x 30.9cm W x 10.2cm D)
Weight: 7.4 lbs. (3.4 kg)
Nominal Power Requirements
Via 802.3af (PoE) Ethernet Switch:
VE5090A
FlexHorn
Environment
Temperature:
Humidity:
PSE:
Precautionary Designations
Class 3
1
0 to 85% non-precipitating
(Power Sourcing Equipment)
to be compliant to IEEE 802.3af
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: To reduce the risk of electric shock,
Do not remove cover.
No user serviceable parts inside.
Refer servicing to qualified service personnel.
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
Issue 2
0 to +40° C
947769
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Valcom VE5090A
Summary of Contents for Valcom VE5090A
- Page 1 Horn and a Network interface, allowing stand alone capability when used with a SIP telephone system or can be accessed from a variety of Valcom managed VoIP products. Power is provided to the VE5090A via a Power over Ethernet (PoE) switch meeting the 802.3af specification. Environment...
- Page 2 Mounting manual, may cause harmful interference to The VE5090A is designed for surface mounting radio communications. Operation of this on a solid surface. Remove the grille from the equipment in a residential area may cause...
- Page 3 Power Connections The only method of powering a VE5090A IP PoE One-Way/Talkback Surface Mount FlexHorn is via a Power over Ethernet (PoE) network switch or power injector meeting the 802.3af specification. Network Connection The VE5090A has one Ethernet RJ-45 network connector on the circuit board.
- Page 4 VALCOM LIMITED WARRANTY Valcom, Inc. warrants its products only to the original purchaser, for its own use, to be free from defects in materials and workmanship under conditions of normal use and service for a period of one year from the date of shipment. This Limited Warranty obligation shall be limited to the replacement, repair or refund of any such defective device within the warranty period, provided that: 1.
Need help?
Do you have a question about the VE5090A and is the answer not in the manual?
Questions and answers