High Level Brake Light - Vauxhall MOVANO Owner's Manual

Rear brake, tail, turn signal,
reverse and fog lights
Van variants:
1. Remove retaining screw from top of light
assembly and pull assembly downwards.
2. Press the retaining tabs together to
separate bulb holder from lens.
3. Renew bulb; sequence from top to
bottom:
Tail and brake light
Turn signal light
Reverse light
Fog tail light 3
4. Install bulb holder to lens; engage clips.
5. Install light assembly with screw.
Chassis variants:
1. Remove four retaining screws.
2. Renew bulb; sequence outer to inner:
Turn signal light
Brake light
Tail light
Reverse light or fog tail light
3. Install four screws.
Self-help

High level brake light

1. Remove cover disc from access hole in
inner rear door trim.
2. Remove retaining nut, and pull light
away from door.
3. Install light in door and retain with nut.
4. Replace trim cover disc.
131