52
Seats, Interior
Grasp the b ackrest, p ull the handle a t the
outboard side of the seat and fold the
back rest onto the seat. Release the handle
and engage the bac krest.
9
Warning
To prevent injuries, always hold the seat
back rest firm ly and g uide downward
when folding.
To raise, pull the handle on the outb oa rd
side of the seat and ra ise the ba ckrest.
Release the handle a nd engage.
Insert the seat belt into the belt guid e at
back rest.
Fold the cent re seat forw ard a nd lower.
House centre seat belt in the holder in the
ceiling 3 61.
Insert seat belts into recesses in seat
cushion.
Slide c entre seat head restraint a ll the way
down 3 45.
Pull release ha ndle on the b ack of the
centre seat backrest, see fig ure. Fold
backrest forward a nd engage. The entire
seat is lowered.
9
Warning
The load m ust not hind er the operation
of the hand brake or gear lever 3 56.
Ra ise centre seat
Pull release handle on the back of the
bac krest, erect the backrest a nd engage,
the outer seats must be in the outer
position, see configuration 1: Three rear
seats 3 50.
Lower outboa rd sea ts
Push front seat forward a nd fully lower or
remove head restraints on the rear
outboard seats 3 45.
Fold outer rear seat bac krests onto seat
bases.
To achieve a lev el loading surface, pull
release handle on back of backrest and
push seat down until it latches into
position.