Other Commands; Opening The Transmitter In Poll Mode; Closing The Connection To A Transmitter In Poll Mode - Vaisala HUMICAP MMT162 User Manual

User's Guide ______________________________________________________________________

Other Commands

40 __________________________________________________________________ M210934EN-C

Opening the Transmitter in POLL Mode

Use the OPEN command to connect to a transmitter that is in POLL
mode.
OPEN [aaa]<cr>
where
aaa = address (0 ... 255)
Example:
open 0
MMT162 0 line opened for operator commands
Closing the Connection to a Transmitter
in POLL Mode
The CLOSE command closes the connection to the transmitter.
CLOSE<cr>
Example:
close
line closed