Advertisement
Rooms Module
One of the core features of a Total
Control system is the automatic
creation of a Rooms Module. Selecting
this feature will open the Rooms Menu
and allow the user to see the Status of
any of the other (unhidden) rooms
within the Total Control project.
By default, selecting a room from the
Rooms Menu will "convert" the
current user interface (iOS device,
remote, keypad, etc.) to an interface
for the chosen room and allow Control
of that room. This is truly Total Control,
as any remote/user interface, by
default, can control any other room in
the project.
An installer has the option, on any user interface, to limit the use of the Control portion of the Rooms Module
based on the following selections:
11
Total Control Mobile
Total Control Mobile
ALL: This allows the selected controller to see and
control all unhidden rooms in the project
Disable: This allows the user to see all other unhidden
rooms, but only control the room in which the iOS
device was placed.
Selected Rooms: The user can see all the rooms on the
project, but can only control the selected rooms.
Advertisement
