TYAN Triumph i7320 S6621 User Manual page 31

Back to Advanced BIOS Features Setup Menu:
Hard Disk Boot Priority:
This item selects the hard disks booting priority. By pressing <Enter> key, you
can enter its submenu where the hard disks detected can be selected for the
booting sequence to boot up system.
This item functions only when there is the option of [Hard Disk] in any one of the
First/Second/Third Boot Device items.
First Boot Device / Second Boot Device / Third Boot Device / Boot Other
Device
Select the drive to boot first, second and third in the [First Boot Device],
[Second Boot Device], and [Third Boot Device] fields respectively. The BIOS will
boot the operating system according to the sequence of the drive selected. Set
[Boot Other Device] to [Enabled] if you wish to boot from another device other
than these three items.
Boot Up NumLock Status:
This item determines the default state of the numeric keypad at system booting
up.
[On]: The numeric keypad functions as number keys.
[Off]: The numeric keypad functions as arrow keys.
Security Option
This item determines when the system will prompt for password - every time the
system boots or only when enters the BIOS setup.
[Setup]: The password is required only when accessing the BIOS Setup.
[System]: The password is required each time the computer boots up.
NOTE: Don't forget your password. If you forget the password, you will have to open
the computer case and clear all information in the CMOS before you can start up the
system. But by doing this, you will have to reset all previously set options.
MPS Version Control For OS
This item specifies which version of MPS (Multi-Processor Specification) this
motherboard will use. Leave this item to its default setting.
Delay IDE Initial (Secs):
This item allows the BIOS to support some old or special IDE devices by
prolonging this delay time. A larger value will give more delay time to the device
for which to initialize and to prepare for activation.
31
http://www.TYAN.com