Triumph Tiger 1050cc Maintenance Check Sheet

SCHEDULED MAINTENANCE CHECK SHEET
Customer Name:
Job No:
Registration No:
Carry out all the operations specified below at the required intervals. Additional operations must be carried at the specified time/mileage interval whichever comes
first. IMPORTANT: Under severe operating conditions, certain items require more frequent servicing, refer to the owner's handbook for further information.
First 500 Miles/800 Kms/1 Month*
Every 6000 miles/10000 Kms/1 Year*
Every 12000 miles/20000 Kms/2 Years*
Every 18000 miles/30000 Kms/3 Years*
Every 24000 miles/40000 Kms/4 Years*
Every 30000 miles/50000 Kms/5 Years*
Lubrication
- - - - - - 1. Engine oil - renew.
- - - - - - 2. Engine oil filter - renew.
- - - - - -
3. Engine/oil cooler - check for leaks.
Fuel system/engine management
- - - - - - 1. Throttle cables - check/adjust.
- - - - - -
2. Fuel system - check for leaks.
- - - - - -
3. Engine ECM - check for stored DTCs.
- - 4. Air cleaner - renew.
- - - - -
5. Throttle bodies - balance.
- - 6. Secondary air injection system -check.
-
7. Evaporative hoses (California) - renew.
- 8. Fuel hoses - renew.
Ignition System
- - -
1. Spark plugs - check.
- -
2. Spark plugs - renew.
Cooling System
- - - -
1. Coolant level - check/adjust.
- - 2. Coolant - renew.
- - - - - - 3. Cooling system - check for leaks.
Wheels/tyres
- - - - - - 1. Wheels - inspect for damage.
- - - - - - 2. Tyre wear/tyre damage - check.
- - - - - -
3. Tyre pressures - check/adjust.
Steering and Suspension
- - - - - - 1. Steering - check for free operation.
- - - - - -
2. Forks - check for leaks/smooth operation.
- - - - - - 3. Headstock bearing - check/adjust.
- - 4. Headstock bearing - lubricate.
- 5. Fork oil - renew.
E Triumph Designs Ltd 2006
Tiger 1050cc
Mileage:
V.I.N.:
Under Warranty: Yes/No
* Whichever comes first
Model:
Date of registration:
Today's date:
First 500 Miles/800 Kms/1 Month*
Every 6000 miles/10000 Kms/1 Year*
Every 12000 miles/20000 Kms/2 Years*
Every 18000 miles/30000 Kms/3 Years*
Every 24000 miles/40000 Kms/4 Years*
Every 30000 miles/50000 Kms/5 Years*
Brakes
- - - - - - 1. Brake fluid levels - check.
- - 2. Brake fluid - renew.
- - - - - -
3. Brake master cylinder - check for leaks.
- - - - - - 4. Brake calipers - check for leaks & seized
pistons.
5. Brake pads - check wear levels. ◊
- - - - - -
Electrical
- - - - - - 1. Lights, instruments & electrical systems -
check.
Drive Chain
1. Drive chain rubbing strip - check. ◊
- - - - -
- - - - - - 2. Drive chain slack - check/adjust.
3. Drive chain - wear check. ◊
- - - - - -
- - - - - -
4. Drive chain - lubricate.
Engine
- - - - - - 1. Clutch cable - check/adjust.
- - - - - -
2 Exhaust clamps - check/tighten.
- - 3 Valve clearances - check/adjust. {
General
- - - - - -
1. Fasteners - inspect visually for security.
- - - - - - 2. Stand - check operation.
- - - - - - 3. Carry out all outstanding service bulletin and
warranty work.
- - - - - - 4. Carry out road test.
- - - - - -
5. Complete the service record book.
NOTES
The following notes must be referred to as necessary during scheduled
servicing.
◊
Renew checked items if worn beyond the service limit.
{
Adjustment of valve clearances subject to additional labour
charge above cost and time allowance for the basic service which
includes time to check only.
Daily checks must also be carried out as specified in the
owners handbook.
- = Complete
Technician Name:
Work completed (sig)__________
Handbook stamped:
* Whichever comes first