System Requirements - Canon DV-PC Recorder Software Instruction Manual

System Requirements

OS
CPU
RAM
Free Hard Disk Space
Display
Interface
❍ Proper operation is not guaranteed on a dual CPU PC or on a user-built PC.
❍ Proper operation is not guaranteed on any particular system, even if it meets the requirements
outlined above.
❍ Recordings cannot be saved on a hard disk recognized as [Removable disk].
❍ This software will not operate properly if repeater or other IEEE1394 devices are connected to
the computer's IEEE1394 (DV) terminal.
❍ This software will not operate properly if more than one camcorder is connected to the
computer.
❍ Proper operation is not guaranteed for recording on compressed drives.
❍ This software can also be used with recordings in 24p mode (NTSC only). Use an editing
software that supports the 24p mode.
Microsoft Windows XP Home Edition or Professional
(installation of Service Pack 1 recommended)
Proper operation is not guaranteed on Windows XP that has been
upgraded from a previous version.
Pentium III 800 MHz or more (Pentium 4 or later recommended)
128 MB or more (256 MB or more recommended)
For installation
Free Hard Disk Space: 30 MB or more
For video recording
Free Hard Disk Space: 1 GB or more (1 minute of video recording
File System: NTFS
Recordings cannot be made on FAT32 or FAT16 formatted hard
disks.
800 × 600 pixels (1024 × 768 pixels or more recommended)/High
Color (16 bit) or better
IEEE1394 (OHCI compliant)
7
uses 0.22 GB)