Canon DV-PC Recorder Software Instruction Manual page 21

Recording on the Hard Disk
• Recording starts on both the tape in the camcorder and the hard disk.
• changes to
• When the tape reaches the end, recording on the hard disk continues.
• When no tape is inserted, or the tape is write-protected, recording is saved only on the
hard disk.
• To stop recording, click
• To save the next scene as another file in [Sequence] mode, finalize the file by clicking
in recording or stop mode.
• If you have not finalized after stopping recording in [Sequence] mode, the preview on
the playback panel does not appear. Restart recoding or finalize the file by clicking
❍ When you change the frame rate on the camcorder during recording, recording stops for a
moment. The recording after restart will be saved as a new file.
❍ With notebook PCs, recording on the hard disk will continue without entering the system
standby or hibernates mode even when you close the display during recording.
, and the indicator starts moving.
.
21
.