Installing the Drivers & Software
<< Previous
Next >>
Installing the PIXMA MX432 on Your Wireless Network
When you reinstall your printer on your network because of a router or network change, you follow the same procedure as for a first time
install. A step-by-step walk through of the wireless setup is built in to the installation routine of the software that shipped with your PIXMA.
*Insert the Setup CD-ROM
that came with your printer into your CD-ROM drive and proceed through the easy to follow instructions.
*If you don't have or cannot use the Setup CD-ROM, you can still install the printer using a downloaded file.
Click here for
information.
If the following screen appears, click Start Setup Again
6