Buick Verano User Manual page 81

Call waiting must be supported on
the Bluetooth phone and enabled by
the wireless service carrier to work.
To switch between calls turn and
press the outer ring of the TUNE/
MENU knob and select Switch Call
or select Switch Call on the screen.
Call waiting must be supported on
the cell phone and enabled by the
wireless service carrier.
Press / to answer an
incoming call when another call
is active. The original call is
placed on hold.
Press / again to return to
the original call.
To decline answering the
incoming call, press Decline on
the screen or take no action.
Press / to disconnect the
current call and switch to the call
on hold.
Conference calling and three-way
calling must be supported on the
Bluetooth phone and enabled by the
wireless service carrier to work. This
feature is only supported when the
vehicle is not moving.
To start a conference while in a
current call:
1. Turn and press the outer ring of
the TUNE/MENU knob and
select Enter Number.
2. Enter the phone number and
select OK.
3. After the call has been placed,
turn the TUNE/MENU knob and
choose Merge Calls.
4. To add more callers to the
conference call, repeat
Steps 1 3. The number of
callers that can be added is
limited by your wireless service
carrier.
Turn and press the outer ring of the
TUNE/MENU knob and select Hang
Up or press Hang Up on the screen.
Press / .
During a call, all sounds from inside
the vehicle can be muted so that the
person on the other end of the call
cannot hear them.
Turn and press the outer ring of the
TUNE/MENU knob and select Mute
Call. Press again to cancel mute.