Buick Verano User Manual page 77

The voice recognition system uses
commands to control the system
and dial phone numbers.
When using voice recognition:
The system may not recognize
voice commands if there is too
much background noise.
A tone sounds to indicate that
the system is ready for a voice
command. Wait for the tone and
then speak.
Speak clearly in a calm and
natural voice.
See
Sound comes through the vehicle's
front audio system speakers and
overrides the audio system. Use the
/VOL knob during a call to
change the volume level. The
adjusted volume level remains in
memory for later calls. The system
maintains a minimum volume level.
See
See
A Bluetooth-enabled cell phone
must be paired and then connected
to the vehicle before it can be used.
See your cell phone manufacturer's
user guide for Bluetooth functions
before pairing the cell phone. If a
Bluetooth phone is not connected,
calls will be made using OnStar
Hands-Free Calling, if available.
See OnStar in the owner manual.
.
A Bluetooth-enabled phone and
an audio playback device can be
paired to the system at the
same time.
Up to five devices can be paired
to the Bluetooth system.
The pairing process is disabled
when the vehicle is moving.
Pairing only needs to be
.
completed once, unless the
pairing information on the cell
phone changes or the cell phone
.
is deleted from the system.
Only one paired cell phone can
be connected to the Bluetooth
system at a time.
If multiple paired cell phones are
within range of the system, the
radio will connect to the first
phone in the list or to the phone
that was previously connected.
1. Press the CONFIG button
or / .
2. Select Phone Settings.
3. Select Pair Device (Phone). The
radio displays Please start
Bluetooth search on your phone.
Confirm or enter number:. If the
device supports a four-digit
Personal Identification Number
(PIN), it will display. The PIN is
used in Step 5.