Buick Verano User Manual page 37

On the CD main page, the track
number displays and the Song,
Artist, and Album information
displays when available.
Use the following radio controls to
play the disc:
Use to pause or
resume play.
Press to seek to the beginning of
the current or previous track.
If the track has been playing for
less than five seconds, it seeks
to the previous track. If longer
than five seconds, the current
track starts from the beginning.
Press and hold to fast reverse
through a track. Release the
button to return to playing
speed. Elapsed time displays.
Press to seek to the next track.
Press and hold to fast forward
through a track. Release the
button to return to playing
speed. Elapsed time displays.
Turn to the
right or left to select the next or
previous track. Press the outer ring
of this knob to select from the list.
If a track is selected from the menu,
the system plays the track and
returns to the CD screen.
If Disc Error displays and/or the disc
comes out, it could be due to:
The disc has an invalid or
unknown format.
The disc is very hot. Try the disc
again when the temperature
returns to normal.
The road is very rough. Try the
disc again when the road is
smoother.
The disc is dirty, scratched, wet,
or upside down.
The air is very humid. Try the
disc again later.
There was a problem while
burning the disc.
The label is caught in the CD
player.
If the CD is not playing correctly, try
a known good CD.
If any error continues, contact your
dealer.
To play an MP3 CD, follow the same
instructions as Playing a CD or
MP3 CD.
The following guidelines must be
met when creating an MP3 disc,
otherwise the CD might not play:
Sampling rate: 16 kHz,
22.05 kHz, 24 kHz, 32 kHz,
44.1 kHz, and 48 kHz.