Troubleshooting - Brookstone HDMI Pocket Projector User Manual

TRoUbleshooTInG

Q . The Projector will not show the video on the wall .
A . Recharge your device's battery . Also, check to see if the HDMI cable
is fully inserted into the Projector and your device .
Q . The video showing on my wall is blurry .
A . Adjust the Focus Wheel on the Projector to fine-tune the picture .
It may also depend on the surface on which you are attempting to
show your video . Try moving to a location with a smoother wall surface .
Q . I cannot get my device to work at all with the Projector and its battery
is fully charged .
A . Make sure the cables are inserted into the correct ports and test
connections .
Q . No signal - I am getting no input from my device .
A . Make sure your device is on - and fully charged .
15