Table of Contents
Advertisement
PROBLEM
No Steam.
Water drips from the Pressing
Plate.
The Pressing Handle will not
move
into
the
Automatic
Maximum pressure position.
Page16
CAUSE
Water Level is too low.
Controls have not been properly set.
Steam Button has been pressed too long. Don t press the Steam Button more than 5 seconds
Item on the Ironing Board is too thick to
use this pressure.
SOLUTION
Fill the water tank.
If suitable for the fabric, make a selection to a
higher temperature. Wait for the Steam Ready Light
to come on. If not use spray misting bottle as
directed.
continuously.
Use lighter pressure on thicker items. Use added
steam for wrinkles.
Digital Steam Press Instruction Manual
Advertisement
Table of Contents
