Use Of The Pressing Cushion - Brookstone Empressa S330 Instruction Manual

USE OF THE PRESSING CUSHION --

Some garments have been constructed with details, such as darts, curved seams and shoulder pads, which are not intended to be
pressed flat. A Pressing Cushion is supplied with your Steam Press for use with these areas.
a. Use the cushion whenever pressing areas where no creases are desired or to shape tailored garments.
b. Place the area to be pressed onto the Ironing Board.
c. Place the Pressing Cushion under the dart, seam etc.
d. Make sure the area to be pressed is raised and lower the Pressing Plate. The raised area is the only area the plate should
contact.
IMPORTANT NOTE: Do not attempt to lower the Pressing Plate to its lowest position or lock the Pressing Plate against the
e. Raise the Pressing Plate after a few seconds.
Page12
Ironing Board with the Pressing Cushion in place. You MAY DAMAGE the Steam Press by doing
so.
Digital Steam Press Instruction Manual