Table of Contents
Advertisement
TROUBLE SHOOTING
Below is a chart detailing the most common problems, their causes and solutions. Before shipping any appliance to a service
center please check to make sure that the solution is not listed here:
PROBLEM
Steam Press cannot be opened
using Pressing Handle.
Steam Press becomes warm but
DOES NOT remove wrinkles.
Press DOES NOT get warm.
Digital Steam Press Instruction Manual
CAUSE
Locking Knob is in Locked position.
Temperature Setting is not high enough
for the fabric attempted.
Temperature has not been selected.
Press is not plugged into an outlet.
Automatic Shut-Off has engaged.
The Pressing Plate has been raised for
more than 15 minutes without use.
SOLUTION
Turn the Locking Knob to the unlocked
position.
Gradually increase the temperature until
obtaining the desired results.
Make a proper selection.
Plug the appliance in.
Press the *POWER* button again.
Page15
Advertisement
Table of Contents
