Removing The Amplifier's Feet; Installing The Option Cards; Using The Quick Connectors; Using The Loudspeaker Output Connectors - Bose AmPlus 100 Installer's Manual

Figure 2
Installing a quick connector

Removing the amplifier's feet

Use a screwdriver to loosen the foot and pull it out.

Installing the option cards

Refer to the installation instructions that come with the equalizer card, Opti-voice
page card, and Opti-source

Using the quick connectors

The quick connectors are supplied so you can connect the amplifier to sources and
other equipment.

Using the loudspeaker output connectors

1
3

Setting the levels

Each input has its own level control. Use these controls to balance the relative level
of each input source. You control overall volume with the remote volume control.

Installing the remote control

The remote control should be wall mounted in an electrical box (not included) similar
to a light-switch electrical box. Install the remote control where day-to-day adjust-
ments will be easy to make.
TM
source card.
2
Getting Started
®
7