Reconnecting To The Earpiece; Button Commands - Blueant Q3 User Manual

Reconnecting to the Earpiece

If you take your phone out of range of the earpiece for more
than 2 minutes, the Q3 will go into "sleep mode" to save
battery. When you bring your phone back into range, simply
double click the
Alternatively, use the hardware switch to turn the Q3 off
whenever you are not using it. The Q3 will automatically
attempt to reconnect to your phone when you switch it on.
Depending on your phone, this may take a few seconds. Please
ensure that Bluetooth is enabled on your phone.

Button Commands

Function
Activate voice
dialing, Siri or
Google Voice
Actions (if
available) on the
primary phone
20
Command button to reconnect.
Do This
Double click the
Command
When
Phone
button connected but
not on a call