Maintenance Instructions - Wells HTI-300AF Operation Manual

Built-in bain marie style heated tanks

Hide thumbs

Table Of Contents

Table of Contents

ADJUST WATER TEMPERATURE

Turn ON/OFF SWITCH to OFF. Disconnect unit from electric power.

Remove screws from lip of control panel. Lift panel out of cabinet.

Reconnect unit to electric power. Turn ON/OFF SWITCH to ON.

Press and hold TEMP SET button on controller until display shows

current temperature setpoint.

While holding SET TEMP button, press UP ARROW or DOWN

ARROW until desired setpoint temperature is displayed. Release

buttons.

Turn ON/OFF SWITCH to OFF. Disconnect unit from electric power.

Reassemble control panel to cabinet.

Reconnect unit to electric power. Turn ON/OFF SWITCH to ON.

Test unit for proper operation.

CARE OF STAINLESS STEEL

External components, such as cabinets and control panels, are

finished with a grain pattern. This pleasing finish is best maintained by

cleaning with a non-abrasive cleanser applied with a soft cloth. Rub

only in the direction of the grain. In the absence of visible grain, rub

only along the longest axis of the appliance.

Restore stainless steel's luster by applying a polish specifically made

for stainless steel. Spray on, wipe off with a soft cloth, rubbing in the

direction of the grain.

Keep your stainless steel warmers clean and free from calcium

buildup.

Use alkaline, alkaline chlorinated or non-chloride cleanser.

Use citric acid-based cleaners to remove calcium deposits.

Wells Lime & Scale Cleaner (p/n 22838) is recommended.