Amplifier; Tmc For Dynamic Navigation Systems - Blaupunkt Nashville DAB35 Operating Instructions Manual

The car sound system provides con-
nections that allow you to connect ex-
ternal amplifiers.
We recommend you use well-matched
products from the Blaupunkt or Veloc-
ity product ranges.
If you are using external amplifiers, you
can switch off the device's internal am-
plifier ("INT AMP OFF" setting).
Note:
Please check this setting if the
G
loudspeakers do not emit any
sound.
➮
Press the MENU•OK button 7.
➮
Press the or
peatedly until "VARIOUS MENU"
appears on the display.
➮
Press the MENU•OK 7, to
display the menu.
➮
Press the or
peatedly until "INT AMP ON" or
"INT AMP OFF" appears on the
display.
➮
buttons 6 to choose
Use the
between "INT AMP ON" and
"INT AMP OFF".
When you have finished making your
changes,
➮
press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
button 6 re-
button 6 re-
TMC stands for "Traffic Message Chan-
nel". Traffic reports are broadcast dig-
itally via TMC, which means they can
be used by compatible navigation sys-
tems during route planning. Your car
sound system has a TMC output, which
you can use for connecting Blaupunkt
navigation systems. You can find out
from your Blaupunkt dealer which nav-
igation systems can be used with your
car sound system.
If a navigation system is connected and
a TMC sender is being received, the
display shows TMC.
If dynamic navigation is active, the sys-
tem will tune into a TMC station auto-
matically.
127