Traffic Information; Dab-Fm Traffic Information Source; Switching Traffic Information Priority On/Off; Setting The Volume For Traffic Announcements - Blaupunkt Nashville DAB35 Operating Instructions Manual

Radio / dab / cd / sd/mmc / mp3
Hide thumbs Also See for Nashville DAB35:
Table of Contents

Advertisement

Your device is equipped with an RDS-
EON receiver. EON stands for En-
hanced Other Network.
Whenever a traffic announcement (TA)
is broadcast, the system switches au-
tomatically from a station that does not
provide traffic reports to the appropri-
ate traffic information station within the
broadcasting network that does.
Once the traffic report has been played,
the system will switch back to the pro-
gramme that you were listening to be-
fore.
If traffic information priority is activat-
ed, the device automatically switches
to an incoming traffic announcement
being broadcast via DAB within a DAB
broadcasting network (in DAB mode)
or via FM (in radio mode, see RDS-
EON). In AUX, SD/MMC, CD/MP3 and
CD-changer mode, you will hear traffic
announcements played from the
source that was active last (either DAB
or radio).
Press the TRAF button 8.
The priority for traffic announcements
is activated if the display shows the traf-
fic jam symbol.
Notes:
You will hear a warning beep:
If you leave the reception area of a
G
traffic information station that you
are currently listening to.
If, while listening to a CD/MP3,
G
SD/MMC or a CD in the changer,
you leave the reception area of a
traffic information station that the
system is tuned into and the sub-
sequent automatic search cannot
find a new traffic information sta-
tion.
If you retune the radio from a traf-
G
fic information station to a station
that does not broadcast traffic in-
formation.
If you hear the warning beep, you can
either switch off traffic information pri-
ority or tune into a station that broad-
casts traffic information.
Press the MENU•OK button 7.
Press the
or
peatedly until "VOLUME MENU"
appears on the display.
Press the MENU•OK button 7 to
display the volume menu.
Press the
or
peatedly until "TRAFFIC" appears
on the display.
Adjust the volume using the
buttons 6.
Press the MENU•OK button 7
and then the DIS•ESC button 5
to exit the menu.
button 6 re-
button 6 re-
93

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents