Switching The Pin Code On/Off; Changing The Pin Code - Blaupunkt Antares T60 Operating Instructions Manual

STARTING TELEPHONE OPERATION
Important:
Be sure to memorise your PIN code and
do not reveal it to any unauthorised per-
sons.
When ENTER PIN appears in the display,
enter your PIN number on the 0 - 9
keypad, beginning with the first digit.
After you have entered the PIN code
completely, press OK or
Note:
If you enter the PIN code incorrectly three
times in succession, the SIM card will be
locked. For more information, refer to the sec-
tion on "Unblocking the SIM card".
Once the PIN code has been entered cor-
rectly and confirmed, the Radiophone will
switch on and the operating mode used last
(radio, CD changer or telephone) will be acti-
vated.

Switching the PIN code on/off

If your SIM card supports this function, it is
possible to switch the PIN inquiry on or off. If
the PIN inquiry is switched off, anyone can
use your SIM card and the Antares T 60 tel-
ephone. If the PIN inquiry is active, the valid
PIN must be entered each time you switch
the Radiophone on.
Note:
It is not possible to switch off the PIN inquiry
unless your SIM card supports this function.
Press to switch to the telephone
mode.
Press OK.
The DSC menu will appear in the display. The
cursor will mark Setup .
Press OK.
Press as often as necessary until the
marks the menu item PIN-
cursor
code .
Press OK.
22
#
.
Press / to select the PIN code you
want to switch on or off (normally
PIN 1).
Press OK.
A menu PIN 1 containing all the functions
available will appear in the display.
Press / to select the desired func-
tion On or Off .
Press OK.
The PIN code must be entered to confirm this
change.
Enter your PIN on the 0 - 9 keypad, be-
ginning with the first digit.
Press OK.
Now the Radiophone will return to the origi-
nal PIN 1 menu.
Press CLR repeatedly until you return
to the main menu or press and hold
down CLR for longer than one second
to return to the DSC menu.

Changing the PIN code

Access the PIN 1 menu as described in
the section on "Switching the PIN code
on/off".
Press / to select the function
Change .
Press OK.
Enter your old PIN on the 0 - 9 keypad,
beginning with the first digit.
Press OK.
Enter your new PIN on the 0 - 9 keypad,
beginning with the first digit
and confirm the new number by enter-
ing it again.
Press OK.
You will return to the PIN 1 menu.
Press CLR repeatedly until you return
to the main menu or press and hold
down CLR for longer than one second
to return to the DSC menu.