Frigidaire 220218A007 Use And Care Manual page 6

Air Conditioner Features
(continued)
TO ADJUST FAN SPEEDS:
A 2 Digit Display is used to indicate the Fan Speed setting, from 10 through 99. When the "SLOWER" button is pressed the motor speed
will slow down at various intervals, down to a minimum setting of 10. To speed the motor up, press the "FASTER" button. The speed will incr-
ease at multiple intervals to a maximum setting of 99. Display will revert back to temperature setting after a short time.
TO USE AUTO TEMP FEATURE:
Note: Fan speed starts at High Speed and adjusts to a slower speed as the room temperature dictates. For example if the room doesn't
get too warm, it will stay at the slowest speed. If the room temperature rises quickly, such as a door being opened, it will automatically go
to the highest speed. The fan speeds will re-adjust back to the slowest speed as the room returns to the original set temperature.
TO OPERATE ON FAN ONLY:
Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air. (Remember to open the
vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan speed you prefer. (Exc-
ept "Auto Temp").
During this function, the display will show the actual room temperature, not the set temperature as in the cooling mode.
SZ000728(En)-Yaokong 6
DO THIS:
PRESS TO
SELECT:
FASTER
SLOWER
LIGHT ON
DO THIS:
PRESS AUTO
TEMP
BUTTON
DO THIS:
PRESS
MODE BUTTON
CHOOSE
FAN ONLY
LIGHT ON
6
09/20/2005, 5:30 PM
YOU WILL SEE (10-99):
YOU WILL SEE:
YOU WILL SEE: