Related Manuals for Frigidaire 220213A196
Summary of Contents for Frigidaire 220213A196
-
Page 1: Electronic Control
USE & CARE MANUAL READ AND SAVE THESE INSTRUCTIONS ELECTRONIC CONTROL AIR CONDITIONER P/N 220213A196... - Page 2 Your product is protected by this warranty Your appliance is warranted by Electrolux. Electrolux has authorized Frigidaire Consumer Services and their authorized servicers to perform service under this warranty. Electrolux authorizes no one else to change or add to any of these obligations under this warranty. Any obligations for service and parts under this warranty must be performed by Frigidaire Consumer Services or an authorized Frigidaire servicer.
-
Page 4: Operation Of Current Device
• If the air conditioner is to be installed in a window, you will probably want to clean both sides of the glass first. If the window is a triple-track type with a screen panel included, remove the screen completely before installation. -
Page 5: To Turn Unit On
Air Conditioner Features SET TEMP. FAN SPEED TO TURN UNIT ON: DO THIS: ELECTRONIC CONTROL OPERATING INSTRUCTIONS be controlled by the unit control alone or with the remote. YOU WILL SEE: The unit can SET TEMP. FAN SPEED ... -
Page 6: To Change Temperature Setting
Air Conditioner Features (continued) TO CHANGE TEMPERATURE SETTING: DO THIS: TO ADJUST FAN SPEEDS: DO THIS: TO USE AUTO TEMP FEATURE: DO THIS: YOU WILL SEE: YOU WILL SEE: YOU WILL SEE:... - Page 7 Air Conditioner Features (continued) DO THIS: DO THIS:...
- Page 8 Air Conditioner Features (continued) DO THIS: TIMER: DELAY STOP/START FEATURE: YOU WILL SEE: DO THIS: THEN DO THIS:...
-
Page 9: Check Filter Feature
Air Conditioner Features (continued) CHECK FILTER FEATURE: LIGHT On CLEAN AIR FEATURE (on some models): REMOTE SENSING/FOLLOW ME FEATURE (on some models) SET TEMP. FAN SPEED DO THIS: PRESS REMOTE SENSING/FOLLOW ME BUT T ON ON Note: This feature can be activated from the remote control ON L Y , the unit must be in a cooling mode. -
Page 10: To Turn Unit Off
DO THIS: This Exhaust Control allows the air conditioner to either recirculate inside air (CLOSED) or exhaust air to the outside (OPEN). The CLOSED position is used when maximum cooling is desired. It may also be used for air recirculation without cooling when the air conditioner is set in any FAN position.