Frigidaire 220202D019 Use And Care Manual page 7

Air Conditioner Features
(continued)
TO USE AUTO COOL FEATURE:
DO THIS:
PRESS AUTO
COOL
BUTTON
TO OPERATE ON FAN ONLY:
PRESS MODE
CHOOSE FAN
TO USE THE ENERGY SAVER
FEATURE:
DO THIS:
PRESS MODE
ENERGY SAVER
SZ000400(En)-Yaokong 7
YOU WILL SEE:
YOU WILL SEE:
DO THIS:
BUTTON
ONLY
YOU WILL SEE:
BUTTON
CHOOSE
LIGHT On
Note: Fan starts at High Speed and adjusts to a slower speed
as the room temperature dictates. For example if the room
doesn't get too warm, it will stay at the slowest speed. If the
room temperature rises quickly, such as a door being opened,
it will automatically go to the highest speed. The fan speeds
will re-adjust back to the slowest speed as the room returns to
the original set temperature. Press either the fan slower or fan
faster button to adjust the fan speed manually.
LIGHT On
Note: Use this function only when cooling is not desired, such
as for room air circulation or to exhaust stale air(on some
models). (Remember to open the vent during this function, but
keep it closed during cooling for maximum cooling efficiency.)
You can choose any fan speed you prefer.
During this function, the display will show the actual room
temperature, not the set temperature as in the cooling mode.
LIGHT On
Note: In this mode, the fan will continue to run for 3 minutes
after the compressor shuts off. The fan then cycles on for 2
minutes at 10 minute intervals until the room temperature is
above the set temperature, at which time the compressor turns
back on and cooling stars.
7
12/10/2004, 5:36 PM