Advertisement
Telephone Operation continue...
To turn
Press and hold the button until y o u
OFF
hear a ' B eep' .
the ringer
turn OFF.
The ring tone will
Ringer light - This flashes onl y when the
phone is ringing for an incoming call.
Press and hold the button until y o u
To turn
ON
hear two ' B eep' .
the ringer
The ring tone will
turn ON.
Ringer light - This flashes with ring tone when
the phone is ringing for an incoming call.
For some switchboard systems, an access
Inserting a
number must be dialled (usually an 8 or 9)
Pause in
to get another dial tone and an outside line.
the dialling
sequence
Press the PAUSE button immediately after
1
VOL+
the access number to insert a pause of
PAUSE
about 3 seconds, and the desired
number can be dialled immediately.
2
Press PAUSE button to insert a pause
VOL+
when dialling or storing Long Distance
PAUSE
Access Codes.
Storing a
1
In standby mode, press STORE button.
VOL-
Number in
Key in the telephone number you wish to
2
STORE
(0-9,* or #)
store.
Up to a maximum 24 digits.
photo
memories
3
Press the STORE button .
VOL-
Press a (0-9,*or # )button to store the
4
STORE
number in the selected memory.
Your memory is saved when
hear a 'beep'.
To dial a number stored in photo
Dial out
1
memory (0-9,* or #)
Stored
number
In standby mode.
(0-9,* or #)
C
Key in the memory location number
photo
(0-9,* or #)
memories
The number dials automatically and
from standby
mode
the IN USE light will turn on.
In Speakerphone mode.
Dial out
1
1
Press the SPEAKERPHONE button,
Stored
number
Listen for a dial tone.
(0-9,* or #)
The IN USE light will turn on.
2
photo
memories
C
Key in the memory location number
from
(0-9,* or #)
speakerphone
The number dials automatically.
mode
5. Guarantee and service
This product is guaranteed against manufacturing defects for
a period of 1 Year.
This does not cover the product where the fault is due to
misuse, abuse, use in contravention of the instructions, or
where the product has been the subject of unauthorised
modifications or alterations, or has been the subject of
commercial use.
In the event of a problem with the product within the
guarantee period please return it to your nearest Argos store.
If the item is shown to have had an inherent defect present
at the time of sale,
the store will provide you with a
replacement.
Your statutory rights remain unaffected.
6. Technical details
Standard
PB10 Telephone
Temperature range
Operating 0 ºC to 40 ºC
Storage -20 ºC to 60 ºC
PBX compatibility
Timed break recall: 100 ms. Pause length: 3.0
seconds.
Signalling type: DTMF (dual-tone multifrequency)
also called tone dialling.
Network connection
This equipment is intended to be used in the UK
only.
Operation on other countries' PSTN termination
points cannot be guaranteed
Connection and conditions for use
You can connect your PB10 phone to a direct exchange line ( DEL)
- a line connected to a local exchange, with its own phone number; to
an extension socket connected to a DEL; or to an extension on an
approved compatible PBX. Do not connect the
extension to a pay phone.
The ringer equivalence numbers (RENs) of all instruments (phones, fax
machines, etc.) connected to an exchange line must not add up to more
than 4
- otherwise, one or more of them may not ring and/or answer calls
correctly.
The PB10 phone has a REN of 1, and most other telephones have
a REN of 1 unless marked otherwise.
________________________________________
.
BINATONE TELECOM PLC
1 Apsley Way London NW2 7HF,United Kingdom.
Tel: +44(0) 20 8955 2700 Fax: +44(0) 20 8344 8877
e-mail: binatoneuk@binatonetelecom.co.u
________________________________________
We the manufacturer / Importer :
Declare under our sole responsibility that the following product
Type of equipment:
Model Name:
Country of Origin:
Brand:
complies with the essential protection requirements of R&TTE Directive 1999/5/EC on the
approximation of the laws of the Council Directive
the laws of the Member States relating to electromagnetic compatibility (EMC) and the
European Community Directive 2006/95/EC relating to Electrical Safety.
Assessment of compliance of the product with the requirements relating to the essential
requirements according to Article 3 R&TTE was based on Annex III of the Directive
1999/5/EC and the following standard:
EMC:
EN55022:2006+A1
EN55024:1998 + A1+A2
Electrical Safety:
EN 60950-1:2006+A11:2009
The product is labelled with the European Approval Marking CE as show. Any Unauthorized
modification of the product voids this Declaration.
Manufacturer / Importer
(signature of authorized person)
Signature:
Product Operation Director
Waste electrical products must not be disposed of with household waste.
This equipment should be taken to your local recycling centre for safe
treatment.
.
Contents of this User Guide
1. Where to find it
2 . I n s t a l l a t i o n
3 . Wall mount installation
PB10 phone as an
4 . Telephone operation
5 .
Guarantee and service
6 .
Technical details
Pressing buttons on your phone
When the instructions in this user guide tell you simply to 'press ' a
button, this means that you should press the button briefly, then
release it
.
You do not need to '
phone.
k
.
EC Declaration of Conformity
Binatone Telecom Plc
1 Apsley Way London
NW2 7HF, United Kingdom.
Corded Phone
PB10
China
Binatone
/108/EC on the approximation of
London,
Place & Date: 28th Mar, 2011
Or Visit Our Website:
WWW.binatonetelecom .com
press and hold' buttons for any functions on this
UK
BTP
Ver1.0 28-Mar,2011
Advertisement
