Becker Traffic Assist Z 098 Operating Instructions Manual page 48

>>> NAVIGATION MODE
Displaying different route types
You can use the Traffic Assist to display
> D
previously described routes.
> GB
Note:
> F
This function can only be selected if
route guidance is already active or the
> I
route option setting was called up from a
destination input window.
> E
> Press the
Show route types on map
> P
button.
> NL After a short time, the map will appear.
The individual routes are calculated one
> DK
after another and marked on the map.
> S
> N
> FIN
> TR
The area on the right-hand side shows the
> GR
colour key for the individual routes, the
> PL
mileage for each route and the estimated
driving time.
> CZ
> H
> SK
48
Note:
Please note that, in many cases, the fastest
route will overlay a simple or optimum
route.
You can select the desired route by press-
ing one of the buttons.
Avoiding particular types of road
After pressing the button next to
you can exclude various types of road, e.g.
, and
motorways ferries toll roads
the route calculation.
You can set one of the following options
for each of these road types.
Option Meaning
Permitted With this option, the
road type in question is
included in calculating
the route.
Avoid With this option, the
road type in question is
avoided where possible.
Avoid
Prohibited With this option, the
road type in question is
, from
not included in calculat-
ing the route.
> Confirm your selection by pressing the
button.
OK