Baxi Solarflo Commissioning, Maintenance & Servicing Manual page 12

Indication
75ºC
min. 12ºC
max. 105ºC
52ºC
min. 40ºC
max. 67ºC
25ºC
55ºC
60ºC
60ºC
35ºC
1234 h
927 kWh
12 Solarflo - Solar Thermal Domestic Hot Water System
3.1.5 Menu "Info"
In this menu mode all measured values and operating
states are shown.
If the values are marked as "resettable", they may be
reset in the following way:
Choose the value with buttons
Reset value by means of the button
Message "OK?" confirm with
Description
Indication of current collector temperature
Indication of minimum collector temperature
Re-settable to current temperature
Indication of maximum collector temperature
Re-settable to current temperature
Indication of current temperature storage tank (lower)
Indication of minimum temperature storage tank (lower)
Re-settable to current temperature
Indication of maximum temperature storage tank (lower)
Re-settable to current temperature
Indication of universal temperature measuring points (T3)
Indication of current temperature storage tank thermostat
Indication of current temperature collector return
Heating, cooling, temperature differential controller
heat source. Sensor T1...T6
Temperature differential controller
heat target
Operating hours for charging storage tank
Resettable to 0 h
Energy productivity for storage tank
Resettable to 0 kWh
3.0 Commissioning of solar controller
and
= no or = yes
Reset possible
no
yes
yes
no
yes
yes
no
no
no
no
no
Yes
Yes