Power Switch; Indicator Leds; Pushbuttons; Sensors - Bacharach Portable Wireless Infrared Printer Operation & Maintenance Instructions Manual

Description

Power Switch

The Power switch, located on the left side of the printer, is used to turn the
unit ON and OFF.

Indicator LEDs

• Power LED (Green): Glows steady when the printer is turned ON.
• Error LED (Red): Flashes once-per-second when the printer is out of
paper; the buffer is full; or when the print head temperature exceeds
140°F (60°C). This LED will also flash one time when the printer is
placed into its set-up mode (refer to Section Set-Up Mode).

Pushbuttons

• FEED:
- Momentarily press this button to advance the paper. Press and hold
down to feed paper continuously.
- This button in conjunction with the ON/OFF switch is used to start
the printer's self test function (refer to Section Self Test).
- When the printer is in its set-up mode, this button is used to modify
the selected printer parameter (refer to Section Set-Up Mode).
• SEL:
- Used in conjunction with the ON/OFF switch to place the printer into
its set-up mode (refer to Section Set-Up Mode).
- With the printer in its set-up mode, use this button to select the de-
sired printer parameter.

Sensors

• Paper Out: When the paper roll runs out, the printer is disabled to pre-
vent damage to the print head. This condition is indicated by the Error
LED fl ashing red.
• Infrared Sensor: Located at the front of the printer, this sensor
receives the infrared output of an external instrument.
2
IrDA Printer
Instruction 24-9450