Remote Control Operation - Friedrich ZoneAire P09A Installation And Operation Manual

Remote Control Identification and Function
Time/Temperature Set Control
Used for adjusting the timer and temperature
The default display on control panel is room
temperature.
When the " " or the " " button is pressed
in cool mode, the set temperature is displayed
and may be adjusted. After 15 seconds the
display will revert back to room temperature.
Power Control
Timer setting is available from 1-24 hours by
On/Off
pressing the button " " on " ".
Fan Speed Control
Mode Control
: HIGH : MED :LOW
Press this button to change the operation
mode in the order of:
Cool → Dry → Fan
Farenheit/Celscius Control
Press this button to change back
Timer control
and fourth from Farenheit to
In running mode:
Celcius temperature readings
Auto switch off
In standby mode:
Auto switch on
Press the " " or the " " button to
adjust the time setting for 1 hour interval.
5