Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
6
Touch a file name to select image and then
touch
The selected image is stored on your
machine.
• Touch
screen.
7
According to the procedure from step
select the remaining images.
Adjusting the brightness of
the sewing light
You can adjust the brightness of the sewing light to
light up the embroidering area. The brightness of
the sewing light can be set to "OFF" or a setting
between "1" and "5". When "OFF" is selected, the
sewing light does not turn on. When the machine is
purchased, "5" is selected.
The sewing light can be specified from page 4/5 of
the settings screen.
1
Touch
brightness.
Check that the desired sewing light
brightness is selected by checking the
embroidering area.
.
to return to the previous
or
to select the desired
Changing the speaker
volume
The volume of operation sounds (which are
produced when a key is touched in a screen or a
button is pressed in the operation panel) and alarm
sounds (which indicate that an error has occurred)
can be changed.
The speaker volume can be set to "OFF" or a
setting between "1" and "5". When "OFF" is
selected, no sound is produced from the speaker.
When the embroidery machine is purchased, "5" is
selected.
The speaker setting can be specified from page 4/5
of the settings screen.
1
Touch
speaker volume.
4
,
Check that the desired speaker volume is
selected with the operation sound
produced when a key is touched.
and
to select the desired
Using the Settings Key 227
6
Advertisement
Table of Contents
Troubleshooting
