Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
UTILITY STITCHES
e
Press
(OK key) or
key).
The initial stitch screen appears again, and
the stitching density is changed.
CAUTION
● If the stitching density is too compacted,
depending on the needle, the stitches may
be bunched together, causing the needle
to break.
Changing the pattern length
The length of one part of a satin stitch can be set to
one of five sizes.
a
Select a satin stitch (No. 41–56 of
selected with
b
Press
(Settings key) in the operation
panel.
The settings screen appears.
c
Press
or
(Stitch length keys) until
is displayed.
The screen for changing the length of a satin
stitch appears.
122
(Cancel/clear
,
).
d
Press
or
(Stitch width keys) until the
desired ratio is selected.
The length can be set within the range of
and
.
• Press
to reduce the length. If the key is
pressed while the smallest setting (×1) is
displayed, a beep sounds.
• Press
to increase the length. If the key is
pressed while the largest setting (×5) is
displayed, a beep sounds.
The satin stitch length is changed.
Press
(OK key) or
e
key).
The initial stitch screen appears again.
(Cancel/clear
Advertisement
Table of Contents
