Wireless Clients - Aztech WL557RT4 User Manual

User Manual
packets will lower the wireless network performance. The Fragment Threshold
value should not be set too low. The default value is 2346.
DTIM: Set the DTIM (Delivery Traffic Indication Message) value. The range is
1~255ms. The default value is 1ms.
Preamble Mode: You can select the short preamble or the long preamble. The long
preamble can realize the interactive operation with the 1Mbps and 2Mbps data
rates of 802.11. The short preamble adopts the minimum header and the data rate
is faster. If the signal strength is weak, the short preamble is recommended.
CTS Mode: You may select No, Always, and Auto. CTS mode can avoid data
conflict and data loss.
Band Width: Select the proper bandwidth in the drop-down list. You may select
20MHz or 20MHz/40MHz (Auto).
Short Guard Interval: Enable or disable the short guard interval. After enabling this
function, the interference between the carriers can be prevented.
After finishing setting, click the Apply button to make the settings take effect.

Wireless Clients

This page displays the information about all the wireless clients that have been
connected to the wireless router.