Aztech WL557RT4 User Manual page 44

User Manual
DNS provided by the ISP.
Subnet Mask: After selecting the Static IP, you need to enter the subnet mask
provided by the ISP.
Gateway: After selecting the Static IP, you need to enter the gateway provided by
the ISP.
DNS: After selecting the Static IP, you need to enter the DNS provided by the ISP.
MAC Address: Enter the MAC address of the host that accesses the Internet via
the wireless router. Some ISPs requires you to enter the MAC address. After
entering the MAC address, only the host with the corresponding MAC is allowed to
access the Internet via the wireless router.
MAC Clone: After clicking this button, the MAC address of the host that is
managing the Web page will be copied to the MAC Address field.
MTU: Set the MTU value. You may consult your ISP whether this value needs to
be modified. Usually, you do not need to change it.
Connection Mode: You may select Connect Automatically, Connect Manually,
or Connect on Demand.
Max Idle Time: Set the maximum idle time. During the idle time, if the LAN user
does not generate any network access request, the wireless router will
automatically disconnect the network connection for protecting your network
resources. You need to set this parameter only in the Connect on Demand mode.
After finishing setting, click the Apply button to make the settings take effect.